by Brad Strong | Dec 10, 2018 | Blog, CAD Performance, CAD Translation, What's New |
There are many SOLIDWORKS 2019 speed enhancements, but the most noteworthy is that a 26x speed increase in complex part viewport rotation, measured in frames per second (FPS); specifically, SOLIDWORKS 2018 tested at 4.9 FPS, whereas SOLIDWORKS 2019 tested at 129 FPS!...
by Brad Strong | Nov 27, 2018 | 3D Printing, Blog, CAD Performance, What's New |
OMAX, a manufacturer of abrasive water jets for machine shops, fabricators and manufacturing companies, discusses how they use TransMagic to solve 3D CAD data problems. Abrasive waterjet cutting is impressive. These sophisticated machines can cut a large range of...
by Brad Strong | Sep 17, 2018 | Blog, CAD Performance, CAD Translation, Training, What's New |
Some of the tools in TransMagic can be lifesavers when you need them, and they often can work together like a Swiss army knife; two such tools are Flatten Assembly and Convert to Assembly. It is important to note that usually our customers either use one or the other...
by Brad Strong | Sep 4, 2018 | 3D Printing, Blog, CAD Comparison, CAD Repair, CAD Translation, CAD Validation, CAD Viewing, Polygonal Output, What's New |
What’s in the SuperView eval? Many people think that the TransMagic Superview eval must be some kind of limited version of TransMagic, but the standard SuperView eval is exactly the same as the one our customers use; it’s just limited to 7 days of use....
by Brad Strong | Aug 20, 2018 | Blog, CAD Translation, Support, Training, What's New |
Split Body and Trim Body are features built into TransMagic Expert, which allow you to set a split-trim body, and use that body to affect a second body by spliting the body, or trimming the body. In the overview image at right, you can see an example of each; in the...
